INFO:

To run Zero Shades of Gray, build your HW according to one of the schematics.
The LED and it's resistor is optional :) 

Feed with 3-5 Volts.

The two crystal load capacitor depends on your crystal.
20pF should work fine for a normal HC/49 crystal.
10pF is for my 3.2 x 2 mm SMD crystal.


FLASH AND FUSE SETTINGS:

Don't forget avrdude option -c <yourtypeofprogrammer>

High fuse should be 0xD9.
Low fuse should be 0xFF

Fuse parameters for avrdude: -p atmega328p -U hfuse:w:0xD9:m -U lfuse:w:0xFF:m
Flash parameters for avrdude: -p atmega328p -U flash:w:zsog.hex

PCB:

Do you now how to solder surface mount components? I have a few PCBs... Contact me!

Good luck! 

Any questions? Send me a mail: adent@chroma.se